+86-19352709151
Jack Tools Series
0102030405
EPS Multi point intelligent synchronous control jacking system
Features
Adopting a high induction touch screen, intelligent synchronization, foolproof operation, multiple protection functions, fault alarm protection, and error reset, it achieves high-speed zero setting and smooth lifting function.
Fully computer-controlled, the lifting process does not require manual intervention, and the system automatically detects the lifting status and can provide information based on the lifting situation; The synchronous control accuracy can reach 0.05mm, and the synchronous lifting and synchronous lowering are completely controllable.
Each control point's oil circuit is relatively independent, and the system pressure can be adjusted separately without interference.
The main components of the system are selected from well-known international brands, and all sealing components are imported, with a wide range of applicability. It can be used in conjunction with single acting or double acting jack systems, which are convenient to use.
The hydraulic pipeline, hydraulic jack, and hydraulic pump unit are all connected by quick insertion joints, equipped with high-precision displacement sensors and pressure sensors, to monitor and feedback the system's working conditions in real time.
Typical configuration and technical parameters
| Synchronization points |
Model |
Pressure |
Rated flow |
Fuel tank capacity |
Pump/Power 380V/50Hz |
Applicable oil cylinder |
External dimensions |
|
Mpa |
L/min |
L |
|||||
|
2 |
YAX-EPS002 |
70 |
0.75 |
40 |
1.1Kw |
Single/double effect |
800*760*900 |
|
4 |
YAX-EPS004 |
70 |
1.13 |
100 |
1.5Kw |
Single/double effect |
800*760*900 |
|
8 |
YAX-EPS008 |
70 |
2*1.13 |
2*100 |
2*1.5Kw |
Single/double effect |
2*800*760*900 |
|
16 |
YAX-EPS016 |
70 |
4*1.13 |
4*100 |
4*1.5Kw |
Single/double effect |
2*800*760*900 |
|
24 |
YAX-EPS024 |
70 |
6*1.13 |
6*100 |
6*1.5Kw |
Single/double effect |
2*800*760*900 |
|
32 |
YAX-EPS032 |
70 |
8*1.13 |
8*100 |
8*1.5Kw |
Single/double effect |
2*800*760*900 |
|
48 |
YAX-EPS048 |
70 |
12*1.13 |
12*100 |
12*1.5Kw |
Single/double effect |
2*800*760*900 |
|
64 |
YAX-EPS064 |
70 |
16*1.13 |
16*100 |
16*1.5Kw |
Single/double effect |
2*800*760*900 |
Operation steps
- Installation and removal bearing; But according to customer special requirement for papermaking machinery, cement machinery and metallurgy copper aluminum metal industry.
- Connect hydraulic pipelines and sensor lines and connect power lines.
- After installing the pipeline, check whether the pipeline and sensor circuit are correct in manual mode after starting up.
- Before synchronizing the lifting operation, first switch the mode to manual lifting mode, and then execute the switch button to start the jack lifting. When the actual pressure reaches the switch pressure value, the jack automatically stops lifting. The set value for the pressure is: the optimal set value is about 30% of the actual load.
- After the fitting is completed, set the target displacement first, press the up button, and the jack will automatically rise. When it reaches the set target value, it will automatically stop moving.
- Engineering cases.